StellarMark I

StellarMark I-Series Laser Marker is a comprehensive solution that satisfies customers with diverse requirements. StellarMark I-Series is easy to install, easy to operate, designed with simple maintenance and safety considerations while providing superior output quality.

StellarMark I Specifications

Stellar Mark I-series		I-10A	IF 20RMZ	IF 20SHS	IF 40HHS
Laser Source	Wavelength	1064 nm	1064 nm
	Type	Nd:YVO4, Q-Switched	Yb-doped, MOPA
	Output Power	10W	20W		40W
	Beam Mode	TEM00
	Frequency	1~100 KHz	1~200 KHz	1~1000 KHz	1~1000 kHz
	Cooling	Air-cooled, no water chiller required
Electrical Requirements	Power Supply	220V, 50/60 Hz Max 12 Amp	110~220V. 50/60 Hz Max 13 Amp
	Power Consumption	2640W	1449W
Dimensions	Laser head	L 600xW 200xH 200 mm	L 525 x W 168 x H 155 mm
	Control unit	L 660xW 250xH 475 mm	L 470 x W 360 x H 241 mm
Laser Marker Weight		16kg	9kg
Control Unit Weight		56kg	25kg
Operating system		Microsoft Windows 2000 / XP / Vista(32/64 Bit) / 7(32/64 Bit) / 8(32/64 Bit) (Desktop or Laptop PCs)
Environment	Temperature	15°C ~ 35°C
	Humidity	10 ~ 80% Non condensing
Safety		Class 4(Class 3R available with safety shield)
Max. Linear Marking Speed		3,000 mm/s	3,000 mm/s
Max. Marking Speed		10,000 mm/s	10,000 mm/s

Model No.	I-10 070A	I-10 110A	I-10 180A
Working Area	70 x 70 mm	110 x 110 mm	180 x 180 mm
Spot Size**	20 μm	30 μm	40 μm
Working Distance	128.3 +/- 1 mm	206.8 +/- 2 mm	350.3 +/- 2 mm
Repeatability**	0.004 mm	0.006 mm	0.010 mm

Model No.	IF 20RMZ 070	IIF 20RMZ 110	IF 20RMZ 180
Working Area	70 x 70 mm	110 x 110 mm	180 x 180 mm
Spot Size**	33 μm	54 μm	86 μm
Working Distance	128.3 +/- 1 mm	206.8 +/- 2 mm	350.3 +/- 2 mm
Repeatability**	0.004 mm	0.006 mm	0.010 mm

Model No.	IF 20SHS 070	IF 20SHS 110	IF 20SHS 180
Working Area	70 x 70 mm	110 x 110 mm	180 x 180 mm
Spot Size**	22 μm	35 μm	55 μm
Working Distance	128.3 +/- 1 mm	206.8 +/- 2 mm	350.3 +/- 2 mm
Repeatability**	0.004 mm	0.006 mm	0.010 mm

Model No.	IF 40 070	IF 40 110	IF 40HHS 180
Working Area	70 x 70 mm	110 x 110 mm	180 x 180 mm
Spot Size**	62 μm	100 μm	159 μm
Working Distance	128.3 +/- 1 mm	206.8 +/- 2 mm	350.3 +/- 2 mm
Repeatability**	0.004 mm	0.006 mm	0.010 mm

Above specifications are subject to change without further notices.
Above spot sizes are material-dependent.
** According to theoretical calculation.