S290 LS Firmware Upgrade Complete v1.09-01
Download
S290 LS Print Driver v3.01.02 for Windows 7 and older 32 Bit OS.
Download
S290 Print Driver v3.05-01 for Windows 7 and older 64 bit OS.
Download
S290 Print Driver v3.71-01 for Windows 7 or older 32 bit OS.
Download
S290-10 Watt YVO4 Firmware version 1.07-04
Download
S290 Firmware v1.09-01 Complete. For S290 20 and 40 Watt. NOT for S290 LS.
Download
S290LS Firmware v3.01-1 Complete. Only for S290 LS with SN after L51203, and Print Diver 3.02-09. Please pay attention to these details here.
Download
S290 LS Print Driver 1.01-05 for Windows 10 and older 64 and 32 bit versions. Extract and then double click EXE to install. See under Instructions below “Instructions on how to install and configure your LaserPro Print driver, and USB port connection.“
Download
Manual Focus Tool Chart
Download
How to Upgrade the Firmware on a S290 Series
Download
S290 LS User Manual
Download
S290 User Manual. Do not operate machine without reading complete manual.
Download
How to determine if my machine has a G3 or G4 laser
Download
Beam Alignment instructions
Download
How to install the old (non .exe versions) of the Print Driver on a 32 or 64 Bit OS PC via USB
Download
How to set Origin with the Red Beam as a reference
Download
How to set Origin with Calipers. Only use Red Beam method if you do not have calipers for precision measurement.
Download
How to tighten up the Lens Carriage Mount On A Spirit LS, GLS, or S290 LS if loose.
Download
How to Upgrade the Firmware. These instruction will also be in the firmware download once unzipped.
Download
LaserPro DirectPrint MAC AI Plug-In User Manual CSX
Download
Waveform Setup Chart for S290 LS – 20 SHS, and 40.
Download
Spirit LS, and S290 LS X Flag CDR file. Cut out of Engraving plastic. Black core for esthetics, any solid color will work.
Download
Photo of the X Flag. If yours had been broken off, download the CDR file to create a new one. The flag file varies by model. Please insure you download the flag file from the correct machine page in support.
Download
Instructions on how to install and configure your LaserPro Print driver, and USB port connection.
Download
Instructions on how to install and configure your LaserPro Print driver when connected via Ethernet port connection.
Download
This video should be watched if you are printing from an application, and the file never makes it to the Spooler or the Laser.
Download
Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download
How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download
How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download
How to release, and seat the X Motor Cable Connection for X PCB and Main Board.
Download
Copyright © 2020 LaserproNA.com All rights reserved. Terms of Use | Privacy Policy