X380 RX Firmware Upgrade complete 3.01-05
Download
X380 Print Driver version 4.01-01 for all versions of Windows. Have machine plugged in and turned on. Once ready double click exe file.
Download
Beam Alignment instructions
Download
How to manually fire the laser for a Laser Power Meter Test
Download
How to install the old (non .exe versions) of the Print Driver on a 32 or 64 Bit OS PC via USB
Download
How to set Origin with the Red Beam as a reference
Download
How to set Origin with Calipers. Only use Red Beam method if you do not have calipers for precision measurement.
Download
LaserPro DirectPrint MAC AI Plug-In User Manual CSX
Download
Photo of the X Flag. If yours had been broken off, download the CDR file to create a new one. The flag file varies by model. Please insure you download the flag file from the correct machine page in support.
Download
Instructions on how to install and configure your LaserPro Print driver, and USB port connection.
Download
Instructions on how to install and configure your LaserPro Print driver when connected via Ethernet port connection.
Download
X252, X380 User Manual. Do not operate machine without reading complete manual.
Download
This video should be watched if you are printing from an application, and the file never makes it to the Spooler or the Laser.
Download
Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download
How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download
How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download
How to release, and seat the X Motor Cable Connection for X PCB and Main Board.
Download
Power and Speed Starting Point for various materials for all models and wattage’s.
Download
Copyright © 2020 LaserproNA.com All rights reserved. Terms of Use | Privacy Policy